Aipulan focuses on high-quality Remote Control Lamp Holder, wireless remote control sockets, lamp holders, WiFi sockets, wireless remote control doorbells, power strips, USB adapters, motion sensor plugs, night lights, and surge protectors. Our lamp holder is not simply a lamp holder with an added remote control, but uses RF wireless control to provide traditional lighting with a more convenient switching experience.
Traditional lighting switches are often fixed in one location. When a lamp is installed in a position that is difficult to reach from the bedside, a switch is blocked by furniture, or a ceiling light is installed at a high position, users need to walk to the switch to operate it. Aipulan's Remote Control Lamp Holder extends the control method from a wall switch to wireless remote control, allowing users to operate the light from a more convenient location.
This design is especially suitable for homes that have already been renovated and where rewiring is inconvenient. It can also be used in older homes where pull switches are damaged or wall switches are difficult to access. The lamp holder itself works with the lamp installation position, so there is no need to change the basic way the existing lamp is used in order to add remote control functionality.
Our lamp holder uses a relatively direct RF wireless control method to give ordinary E26/E27 lighting remote switching capability.
For users who do not need mobile phone Apps, voice control, or home network connections, this control method is more straightforward. Users can switch the light on or off by pressing the buttons on the remote control, without opening a mobile phone or waiting for a network connection.
This product uses RF technology for wireless signal transmission, with a maximum signal range of up to 30 meters. Unlike smart lamps that rely on Wi-Fi or Bluetooth, it does not require a home Wi-Fi network or a mobile App.
The remote control uses direct button operation. Users can control the lamp switch by pressing the corresponding button.
Compared with smart lighting solutions that require users to open a mobile phone, enter an App, and then operate the light, this method reduces the number of operating steps. For elderly users and those who are not accustomed to using smartphones, physical buttons are also easier to understand and operate.
It follows a plug-and-play usage logic. During installation, select an E26/E27 lamp holder that matches the local voltage, screw the lamp holder into the corresponding position, and install a compatible bulb. The pre-programmed remote control can then be used to operate the light.
Select the appropriate specification according to the local power supply conditions.
Install the lamp holder in the lamp position and install a compatible bulb.
Use the pre-programmed remote control to control the light.
If required, multiple lamp holders can be combined to achieve zone control or master control.
This installation method reduces complicated setup steps and makes the product easier for household users, distributors, and lighting product buyers to understand and promote.
| Parameter | Product Specification |
| Product Type | Remote Control Lamp Holder |
| Lamp Holder Type | E26/E27 |
| Maximum Load | Max 60W |
| Input Voltage | 120V/60Hz or 230V/50Hz |
| Product Dimensions | 84 × 51 mm |
| Signal Distance | Up to 30 meters |
| Wireless Technology | RF |
| Control Method | Pre-programmed Remote Control |
| Certification | CE |
Note: Voltage, lamp holder type, and maximum load are the parameters that should be confirmed first when selecting the product.
In bedrooms, when the light switch is far from the bed, users usually need to get up and walk to the switch. The remote control lamp holder can transfer switch control to the remote control, allowing users to control the light while lying in bed.
For lamps installed at high positions, manually operating the switch or the lamp itself is inconvenient. Wireless remote control allows the light to be operated from a lower position, reducing the inconvenience of frequently accessing high-mounted lamps.
When a wall switch is blocked by furniture, cabinets, or other objects, the convenience of a traditional switch decreases. Wireless remote control does not require users to directly access the wall switch, helping solve some control difficulties caused by space layouts.
For homes that have already been renovated, adding remote control functionality without rewiring requires consideration of installation complexity. This product uses a lamp-holder design and can serve as a convenient upgrade option for existing lighting systems.
In addition to residential applications, the product page also lists offices and small commercial spaces as suitable environments. For applications that require control of multiple lights while avoiding complicated smart system configurations, RF remote control provides a relatively direct lighting control solution.
| Comparison Item | Aipulan Product | Traditional Lamp Holder / Smart Lighting |
| Control Method | RF wireless remote control | Manual switch / App, etc. |
| Wi-Fi Required | No | Required by some smart products |
| Operation Method | Physical remote control buttons | Manual or mobile phone operation |
| Suitable Applications | Bedrooms, high-mounted lamps, old house renovation, etc. | General lighting applications |
| Lamp Holder Type | E26/E27 | Depends on the product |
| OEM/ODM | Supports customization of dimensions, Logo, packaging, etc. | Depends on the supplier |
No Wi-Fi or mobile App connection is required. Remote operation is more direct and suitable for lighting applications that require simple control.
Supports E26/E27, with a maximum load of 60W, and provides 120V/60Hz and 230V/50Hz specifications for different market requirements.
The lamp-holder design is suitable for bedrooms, high-mounted lamps, old house renovation, and other applications where directly operating a switch is inconvenient.
Dimensions, Logo, packaging, and other customization options can be provided according to purchasing requirements, making it suitable for brands, importers, and distributors for product matching.
Before use, first confirm that the power supply voltage matches the product specification, then complete the installation according to the lamp structure.
Confirm the voltage specification corresponding to the application environment.
Select a compatible E26/E27 bulb.
Screw the lamp holder into the corresponding installation position.
Install the compatible bulb.
Use the pre-programmed remote control to operate the light.
If zone or master control is required, multiple lamp holders can be combined according to the product's capabilities.
A: The lamp holder uses the E26/E27 specification. When purchasing, buyers should confirm that the target lamp and bulb are compatible. The bulb wattage and local power supply conditions should also be considered to ensure normal product operation.
A: No. The product uses RF wireless technology for control and does not require a home Wi-Fi connection or mobile App. Users can directly control the lamp switch through the pre-programmed remote control, making operation simple and convenient.
A: The wireless signal range is up to 30 meters, and the RF signal can pass through walls for control. The actual remote control distance may be affected by wall structure, installation position, and surrounding environment, so the actual performance may vary.
A: The maximum load is 60W. The product should be selected according to the actual bulb wattage, and the specified maximum load should not be exceeded during use.
A: The product supports two input specifications: 120V/60Hz and 230V/50Hz. When purchasing, the appropriate product version should be selected according to the voltage standard of the target market.
A: Yes. Aipulan supports OEM/ODM customization of dimensions, Logo, packaging, product parameters, appearance, and other aspects. Specific customization options can be confirmed according to the product model, order quantity, and brand requirements.
A: The standard sample production time is 1–5 working days. If special specifications or customization requirements are involved, the specific sample lead time needs to be confirmed according to the actual requirements.
A: The MOQ is determined according to the specific product and purchasing requirements, and some products support small-batch orders. For bulk purchases, the specific MOQ can be confirmed based on the product specifications, customization requirements, and order quantity.
Address
No.2 Lane 282 Baishan Road, Wumei village, Henghe town, Cixi city, Zhejiang Province, China
Tel
