Unlike Wi-Fi dependent smart plugs that require apps and network configuration, this Smart Outlet US Remote Control Socket by Aipulan uses 433MHz RF technology without network, no setup, no app required. RF signals penetrate walls unaffected by network dead zones, addressing the inconvenience of fixed-position switches. The remote and socket come factory-paired with batteries pre-installed. A manual button on the socket body provides a backup control channel.
The socket uses US standard Type A/B configuration with a rated load of 10A/1200W. Built-in automatic power-off protection and overcurrent protection keep the output disconnected after power restoration, preventing unattended restart. The housing is made of flame-retardant plastic. Suitable for lamps, fans, heaters, humidifiers, air purifiers, printers, and other indoor appliances.
The Smart Outlet US Remote Control Socket operates in three simple steps:
1. Plug the socket into any standard wall outlet.
2. Take out the pre-paired remote already with pre-installed batteries .
3. Use the remote or press the manual button on the socket to turn connected devices on or off.
No complex installation, network connection, or smartphone app is required.
Ready out of the box: remote and socket are pre-paired, batteries are pre-installed and no setup steps required.
Dual control: supports both remote control and manual on/off button on the socket. Local operation remains available even if the remote is lost or the battery is depleted.
Wall-penetrating signal: 433MHz RF signals pass through walls, floors, and furniture without line-of-sight requirement.
No network dependency: operates independently of Wi-Fi or internet without disconnection or server failure risks.
Safe and reliable: ETL and FCC certified with built-in automatic power-off protection.
Broad compatibility: compatible with a wide range of household appliances, lighting, and office equipment.
| Parameter | Specification |
| Input Voltage | 120V~60Hz |
| Maximum Current | 10A |
| Maximum Load | 1200W |
| Product Size | 99 × 58 × 40 mm |
| Wireless Frequency | 433 MHz RF |
| Operating Range | Up to 30 meters (line of sight) |
| Feature | 433MHz RF | Wi-Fi |
| Internet required | No | Usually yes |
| App required | No | Usually |
| Router required | No | Yes |
| Gateway required | No | Depends |
| Remote control | Dedicated remote | Smartphone |
| Setup | Factory paired | Network pairing |
| Network outage | Not affected | May affect remote control |
The 433MHz wireless frequency ensures reliable operation even in homes with thick walls or multiple floors. The signal remains strong and consistent, making the socket effective in both small and large spaces.
Compatible with a wide range of indoor devices:
Living room lighting and fan control
Bedroom lamps, humidifiers, air purifiers
Kitchen appliances: coffee makers, rice cookers
Holiday decorations: Christmas tree lights, Halloween displays, ambient lighting
Display lighting: showcase lights, LED signage, promotional displays
Office equipment: printers, coffee machines, monitors
Energy management: turning off idle devices in small offices or retail shops to reduce electricity consumption
Homes with children or elderly residents: automatic power-off prevents accidental operation
Rental properties: remote control without providing internet access to tenants
Garages and basements: operate lighting or tools from the entrance.
| Item | Compliance Status |
| Plug Type | Type A/B (NEMA 1-15 / 5-15), conforms to US National Electrical Code (NEC) |
| Electrical Ratings | 120V~60Hz, 10A/1200W |
| Electrical Safety | ETL certified |
| Wireless Compliance | FCC Part 15.231 certified (433MHz remote control devices) |
| EMC | FCC Part 15B, ensures electromagnetic compatibility and no harmful interference |
| Flammability | Housing materials meet V-0 flammability rating |
| Market Access | ETL and FCC certified, compliant with US safety standards |
Our Smart Outlet US Remote Control Socket follows a strict and advanced production process as follows:
1. High-quality flame-retardant materials are used, ensuring electrical safety and product longevity from the source.
2. Automated assembly lines complete the assembly process, reducing manual handling and ensuring product consistency.
3. Wave soldering ensures secure solder joints on electronic components, preventing poor contact or failure caused by cold joints.
4. AOI (Automated Optical Inspection) automatically identifies soldering defects, eliminating shorts, missing components, and incorrect parts.
5. Aging testing is conducted on each batch, simulating long-term use to screen out early failures before shipment.
6. Full traceability is maintained throughout production, with inspection records retained for every batch.
connected devices remain off during power outages and do not automatically restart when power is restored. After a power interruption, the socket remains OFF when power is restored, helping prevent connected appliances from restarting automatically.
verify compliance with US UL electrical safety standards and FCC radio Flame-retardant materials: high-quality components and flame-retardant materials reduce wear and failure risks.
433MHz RF signals remain stable even in complex layouts.
If the Smart Outlet US Remote Control Socket does not respond to the remote, check the following:
1. Check distance: the remote may be out of range or blocked by obstacles and move closer to the socket and try again.
2. Check pairing: pairing information may be lost and re-pair the socket.
3. Check socket: ensure the socket is powered and the connected appliance does not exceed the rated load.
4. Check interference: other electronic devices or physical barriers may shorten the remote control range.
5. Check battery: the remote battery may be depleted.
1. Do not overload: never connect appliances exceeding the maximum rated power (10A/1200W).
2. Keep dry: this is an indoor model and is not waterproof. Do not use in damp or wet environments. Outdoor use requires a waterproof model.
3. Battery safety: keep batteries out of children's reach. If a battery is swallowed, internal chemical burns may occur within two hours; seek immediate medical attention.
4. Professional installation: for wall-mounted installations, always use a qualified electrician.
When selecting a US remote control socket, consider the following factors:
Safety certification
Prioritise products with UL or ETL certification. This is the minimum safety threshold for the US market. Uncertified products present electrical fire risks and are not recommended.
Power rating
Confirm the socket's maximum current/power specification (common ratings are 10A/1200W or 10A/1200W). Connected appliances must not exceed the socket's rating. High-power appliances such as space heaters and microwave ovens exceed most socket capacities.
Communication protocol
This product uses 433MHz RF technology, controlled by a dedicated remote, independent of Wi-Fi or internet
simple setup and strong wall penetration. Wi-Fi versions require a direct router connection; Zigbee/Bluetooth Mesh versions require gateways. Choose based on actual usage scenarios.
Brand and service
Choose a certified manufacturer with after-sales support. As a factory-direct brand, Aipulan offers OEM/ODM customisation, stable bulk supply, and reliable after sales service.
ETL: Complies with North American safety standards equivalent to UL. The product has been tested by Intertek to UL 498A and UL 60730, confirming eligibility for sale in the US market.
FCC: Meets FCC Part 15.231 for 433MHz remote control devices and Part 15B for electromagnetic compatibility, ensuring that the product does not cause harmful interference and that its RF performance is compliant.
CE：Conforms to European health, safety, and environmental protection standards. Mandatory for products sold in the European Economic Area (EEA).
RoHS: Restricts the use of hazardous substances (lead, mercury, cadmium, etc.) in electrical and electronic equipment, in line with EU environmental directives.
UKCA: The UK's mandatory certification replacing the CE mark, certifying compliance with British safety and regulatory requirements following Brexit.
UK Type Examination Certificate (Eurofins): A formal assessment certificate issued by Eurofins, a UK Approved Body, evaluating product design and construction to confirm conformity with designated standards.
Together, these certifications ensure our products are safe, reliable, and compliant with the regulatory frameworks of major global markets (US,EU, UK, and more).
| Equipment | Function / Description |
| Injection Molding Machine | Produces high-precision plastic housings with flame-retardant properties for structural safety. |
| Automatic Insert Molding Machine | Embeds metal inserts into plastic parts during molding for accurate positioning and high efficiency. |
| Special-shaped Automatic Insert Machine | Handles non-standard or complex inserts, supporting flexible production of diverse designs. |
| Wave Soldering Machine | Automates PCB soldering to ensure consistent, reliable solder joints. |
| AOI (Automated Optical Inspection) Machine | Optically inspects solder quality to detect defects like cold joints, bridges, or missing parts. |
| Automatic Assembly Line | Integrates multiple assembly stations for consistent, high-volume product assembly. |
| Automatic Screw Tightening Machine | Applies precision for final screw fastening to prevent loose connections. |
| Aging Test Bench | Simulates long-term operation under load to verify product reliability and thermal stability. |
It uses US standard Type A/B plug configuration, compatible with outlets in the United States, Canada, Mexico, and other countries following the North American standard.
The remote uses a 12V (23A) alkaline battery or a 3V CR2032 coin cell battery, depending on the model. Battery life is approximately 12 months under normal usage.
Yes. A single remote can be paired with multiple sockets, with each socket assigned to a different button on the remote (e.g., A, B, C).
Check the distance; the remote may be out of range or blocked by obstacles; re-pair the socket; ensure the socket is powered and the connected appliance does not exceed the rated load; check if the battery is depleted; other electronic devices may cause interference.
Do not overload the socket; this is an indoor model and is not waterproof and do not use in damp environments; keep batteries out of children's reach; wall-mounted installations require a qualified electrician.
Yes. The socket carries ETL and FCC certifications, complying with US electrical safety and RF standards.
Address
No.2 Lane 282 Baishan Road, Wumei village, Henghe town, Cixi city, Zhejiang Province, China
Tel
